Loading your Energy Community map

Appointment Confirmed

You're all set.Here's what happens next.

You spoke with EnergyConnect about the Energy Community program — extra federal incentive value tied to where your home is located, and what that can do to the price you pay for electricity. The next step is a short visit from an Everlast energy consultant, who will confirm your address qualifies, walk through the preliminary report for your home, and tell you straight whether it makes sense to keep going.

Take five minutes with this page before they arrive. It covers what an Energy Community is, what happens during the visit, and what to have ready.

ConsultantEverlast Energy & Roofing
LengthAbout 45 min
CostNo charge

Please have everyone who'd be part of the decision at home — the consultant reviews numbers specific to your address, and it's hard to do that twice.

What this is

Why your address matters in 2026.

An Energy Community is a federally designated area where qualifying clean energy projects may have access to additional federal incentive value.

Eligibility is based on federal economic and energy-related criteria and is updated over time. The current 2026 map took effect in June.

For homeowners, the important part is simple: where your home is located can change the numbers available to it.

Highlighted area = current Energy Community
Highlighted areas represent current Energy Community designations shown by the Baker Tilly Energy Community Mapping Tool. Your Everlast consultant will confirm your exact property address during the visit. Source: Baker Tilly Energy Community Mapping Tool. Map is an illustration; boundaries are approximate.
Search your address Opens the Baker Tilly map in a new tab. Your consultant will still confirm your exact address at the visit.

Why your location can change the numbers

Standard qualifying projectPotential project incentive
30%
30%
Energy Community projectAdditional Energy Community value
30%+10
Up to40%
Energy Community + qualifying U.S.-made equipmentAdditional incentive potential
30%+10+10
Up to50%

These percentages represent potential federal project incentives, not a homeowner tax refund.

Depending on the program, that additional project value can be reflected in a lower project cost, lower payment, or lower energy rate.

More savings from Day 1

Additional project value can create more room between what you're paying the utility company today and what you'd pay instead.

More savings over time

Starting with stronger numbers can create significantly more savings over the life of the system.

More room to solve the whole project

Depending on the program, roofing, tree work, electrical upgrades, or battery storage may be able to be included in the overall project financing.

Subject to program requirements and approval.

Buying the equipment yourself

What most people picture when they hear "go green":

  • Tens of thousands of dollars, upfront or financed
  • A long-term loan against your home
  • Waiting until tax season to see any benefit
  • Years of waiting to break even
  • As of 2026, the 30% federal tax credit for homeowners who buy is gone

The Energy Community program, the way it works today

For homes that qualify, there's a different path:

  • The project is built around federal incentives that are still available
  • Your address can add Energy Community value on top
  • That value shows up front — not as a refund months later
  • Savings can start on day one, not years from now
  • Repairs, maintenance and monitoring can stay with the provider

There's more than one way to make the numbers work.

Everlast works with multiple financing and ownership programs because there isn't one option that makes sense for every homeowner.

During your visit, we'll put the available options side by side so you can compare the payment, ownership, savings, and long-term terms.

Path to ownership

Propel by Concert Finance

Propel is designed for homeowners who ultimately want to own their system while using a third-party ownership structure during the initial period.

That structure allows applicable federal incentives, including additional Energy Community value when eligible, to be reflected in the project up front.

  • Lower amount to finance
  • Fixed-payment structure
  • No annual payment escalator
  • Defined path to homeowner ownership after the initial period

Ownership, transfer terms, and financing are governed by the homeowner's actual agreement and are subject to approval.

Lower-cost power

EnFin, a Qcells company

For homeowners who would rather focus on lowering their electricity cost without purchasing the equipment up front, EnFin offers third-party ownership options, including leases and power purchase agreements, in qualifying markets.

  • Little or no upfront equipment cost
  • Predictable payment or energy rate
  • System ownership and applicable maintenance remain with the provider
  • All rates, terms, and any annual adjustments are shown in writing before you commit

You don't need to choose before we arrive. We'll show you both approaches and let the numbers do the talking.

Why the timing matters

June 2026

The current map took effect

The latest federal update set the Energy Community map used today.

Today

Today's programs and pricing

Your options are built on current equipment costs, programs and incentives.

December 4, 2026

New import rules

New federal rules on imported energy equipment are expected to push project pricing up.

2027

The map gets reviewed again

An area that qualifies today isn't guaranteed to stay on the map after the next update.

Nobody's asking you to rush. But if your home qualifies and the numbers work today, it's worth seeing them while the current map, programs and pricing are in place. Your consultant will tell you how long your numbers hold.

Who you spoke with, and who's coming

EnergyConnect and Everlast

EnergyConnect connects homeowners across Connecticut and Massachusetts with the top energy company in their area. When you spoke with an EnergyConnect Specialist about the Energy Community program, that's what the conversation was for — and for Energy Community homes, that company is Everlast Energy & Roofing.

EnergyConnect chose Everlast for this because Everlast is already doing it: running Energy Community assessments for homeowners across CT and MA, checking every address against the current federal map before building a number, and working with more than one program so you see your options side by side instead of being fit into one.

It also matters because the biggest risk in this industry isn't the panels. It's the company that installs them and then disappears. Everlast is based at 135 Sheldon Rd in Manchester, employs 40+ local people, and has been doing energy and roofing here long enough to have a reputation worth protecting.

800+
Projects completed
1,200+
Homeowners served
270+
5 star reviews
40+
Local employees
BBB A+ Accredited Proud Partner of the UConn Huskies 270+ five-star Google reviews CT Post Best of award Expertise.com Best Roofers 2025 HomeAdvisor Screened & Approved Owens Corning Preferred Contractor

Proud partner of the UConn Huskies

Everlast is a partner of UConn Athletics and one of the university's approved roofing providers. UConn vets who it puts its name next to.

Fully licensed

Connecticut: HIC.0667495 · ELC.0181311-E1
Massachusetts: Home Improvement Contractor Reg. #209663 · Master Electrician Lic. #23054A
Every number is public — look them up before anyone comes to your door.

Under one roof

Most energy companies can't touch your roof. Everlast does both, so if the roof needs attention first, that gets handled by the same crew — and may fit into the same project.

The visit

What to expect

This is a conversation, not an installation. Roughly 45 minutes, at your kitchen table. Here's the order it goes in.

  1. Your address, confirmed

    First, the consultant verifies that your exact property falls inside the current Energy Community designation. Everything else is built on that.

  2. Your bill, line by line

    The consultant goes through your current utility company bill with you — supply, delivery, public benefits — so every option gets compared against what you really pay today.

  3. The preliminary report for your address

    Our engineering team builds a report using satellite imagery of your roof: its pitch, its orientation, how much shade it gets, and how much production it could realistically support.

  4. A quick look at the roof and panel

    A short walk around the outside and a look at your electrical panel. Some homes need roof work or a panel upgrade first, and it's better to know that on day one.

  5. Your actual numbers, if you qualify

    Your options side by side, with Energy Community value applied: what you pay the utility company now, what you'd pay instead, and your day-one and long-term savings. Every number specific to your house, not an average.

  6. You decide when you're ready

    We're here to present you with your options — no commitment required. If you want a night to think it over or want to run it past someone first, that's a completely normal answer.

Before they arrive

How to prepare

Four things. None of them take long, and all of them make the visit shorter.

Find a recent electric bill

A paper copy or the PDF on your phone both work. Twelve months of usage history is ideal — you can download it from your utility company account. This is the single most useful thing you can have ready.

Have all decision-makers there

If a spouse, partner or family member would be part of this decision, have them home. We'd rather use your time well than walk one person through numbers they'll only have to explain to someone else later.

Clear a path to the electrical panel

Usually in the basement, garage, or on an exterior wall. The consultant just needs to see it and photograph it.

Write down your questions

Anything you want answered — owning vs. not owning, what happens if you sell the house, what happens if the roof needs work, what happens during an outage. Ask all of it. Better now than after.

Something come up? Just let us know. Rescheduling is easy and we'd much rather move it than have you feel rushed — text or call (860) 362-3129.

Straight answers

Questions homeowners ask

Does this cost me anything?
The visit is free with no obligation. If you move forward, what you pay depends on the option you choose, and you'll see every number in writing beforehand.
Where does the extra Energy Community value come from?

The homeowner federal tax credit ended after 2025, but qualifying clean energy projects can still access federal incentives through certain ownership structures.

When the project sits in an Energy Community, additional incentive value can become available. Depending on the option, that value shows up in the project cost, the payment, or the rate you pay for power, rather than arriving later as a tax refund.
How do I know if my home qualifies?
Eligibility is location-specific. Your consultant verifies your exact address against the current federal map before building any options. Your home also has to be a fit on its own — shading, roof condition, age, and usage all matter.
Why does Energy Community eligibility change?
It's based on federal economic and energy-related criteria, including certain energy-industry employment and unemployment conditions, qualifying brownfield sites, and communities affected by coal closures. The map is updated as new data comes in, so an area can qualify in one period and drop off in a later update.
Do I own the panels?
That's your choice. With lower-cost power, the provider owns and maintains the equipment and you simply buy the power it makes. With the path to ownership, the agreement defines how it becomes yours. Your consultant will price both so you can compare.
What's the difference between Propel and EnFin?
Propel is built for homeowners who ultimately want to own their system: incentive value is reflected in the project up front, you finance a lower amount with a fixed payment, and the agreement defines a path to ownership after the initial period. EnFin is built for homeowners who would rather lower what they pay for power without purchasing the equipment, through a lease or power purchase agreement. Your consultant will show you both.
What happens if I sell my house?
It depends on the option. If you own it, it goes with the house. If the provider owns it, the agreement transfers to the buyer through a defined process. Ask your consultant to walk you through those exact steps and the paperwork involved — it's a fair question and you should have a clear answer, not a reassurance.
What if my roof is old or needs work?
Then it gets addressed before panels go on. This is where Everlast being a roofing company matters — most energy companies have to send you elsewhere. Your consultant will assess the roof during the visit, and it may be able to fit into the same project.
Will my power go out when the grid does?
A standard grid-tied system shuts off during an outage for the safety of line workers. Battery backup changes that, and in some programs adding a battery can improve the overall project value. Ask about it while the consultant is there.
Is there a deadline?
The federal incentive these programs rely on generally requires new projects to be installed and approved to operate by December 31, 2027. Permitting and utility approval take months, so your consultant will walk through realistic timing for your home.
Who is coming to my house?
An Everlast Energy & Roofing energy consultant — a local employee, not a subcontractor. If you'd like their name confirmed ahead of time, call or text (860) 362-3129 and we'll tell you exactly who to expect.
Is this going to be a sales pitch?
It's a qualification visit first. A real percentage of homes don't qualify, and in those cases the consultant tells you and leaves. If your home does qualify, then yes — you'll see your options, along with the numbers behind them. You're free to say no, say not yet, or ask for time.
How long does the whole process take if I move forward?
From finding the option that works best for you and your family to being up and running typically takes a few months, most of which is permitting and the utility's interconnection review — steps neither you nor Everlast controls. The install itself is usually a single day.
I need to move my appointment.
Not a problem at all. Text or call (860) 362-3129 and we'll find a better time. We'd rather reschedule than have you sitting through it distracted.
EnergyConnect Everlast Energy & Roofing

Locally owned and operated energy and roofing, based in Manchester, Connecticut, serving Connecticut and Massachusetts.

CT HIC.0667495  |  CT ELC.0181311-E1
MA HIC Reg. #209663  |  MA Master Elec. #23054A

Contact

(860) 362-3129
support@everlastenergyct.com
135 Sheldon Rd, Unit H
Manchester, CT 06042

© 2026 Everlast Energy & Roofing. Program availability depends on home qualification. Energy Community status is verified for each project under current federal guidance and may change with future updates. Incentives referenced on this page are generally claimed by the qualifying project owner and are not a homeowner tax credit. Propel is offered by Concert Finance; EnFin is a Qcells company. Everlast Energy & Roofing does not provide tax advice. All program terms are provided to you in writing.

SUBMIT YOUR BILL

(860) 362-3129

Call Us Now!